Office networks
A gateway, a switch or two and enough access points to cover the floor. Staff sign in with their Microsoft 365 account and guests get a separate network. We supply the hardware, set it up and document it.
Get a network quoteUniFi Networks
AyeTech sets up UniFi networks for offices of any size, up to high-availability networks that cover a whole building, and manages them remotely from the AyeTech Hub. If you already have UniFi, we can diagnose a problem or audit the setup. We help maintain over 400 UniFi networks across Australia.
The work you never see
Handled remotely from the AyeTech Hub.
North Sydney, Australia wide
What we do
Yes, we can do your office network. We monitor and manage networks remotely, we work on UniFi setups that are already installed, and we build at building scale when the site calls for it.
A gateway, a switch or two and enough access points to cover the floor. Staff sign in with their Microsoft 365 account and guests get a separate network. We supply the hardware, set it up and document it.
Get a network quoteEvery UniFi device and internet line is checked every 2 minutes from the AyeTech Hub. Faults raise tickets, and most fixes and changes are done remotely.
What the managed plan includesUbiquiti's CyberSecure subscription is included in the managed plan. Intrusion prevention is switched on and set to block, and serious alerts are investigated.
How alerts are handledDropouts, slow Wi-Fi, devices landing on the wrong network, or a setup that was never finished. We work out the cause from the console, usually remotely, and come on site when it needs hands.
How we diagnose faultsAlready have a UniFi setup? We read the console, scan the site and write up every finding, rated by severity, with a plan to fix it.
What the audit coversPaired gateways, two internet links and Wi-Fi across every floor, for coworking spaces, serviced offices and corporate sites.
How we build for uptimeExisting UniFi networks
You do not need to have bought the network from us. We work on UniFi setups installed by other providers, by a previous IT person, or by the business itself.
Tell us the symptom and we start remotely with the console, where most faults show up before anyone goes on site.
A full audit of the network and its security. We read the console line by line, scan and measure the site, and write up every finding with a rating.
After either one you can have us fix what we found, hand the list to your own IT, or move the network onto our managed plan.
Faults we have traced
Network and security audit
The audit reads every setting in the console, measures what the network is doing on site, and checks the hardware against what Ubiquiti has published. Nothing is changed while we do it, and every finding in the report says how we know it.
Where the evidence comes from
A read-only pass through every device, port, client and setting, including each access point's radio settings and 30 days of Wi-Fi airtime and internet history.
A scan of every device on the network to see what answers and whether it asks for a login. Packet captures of spanning tree and multicast traffic. A look at the racks, cabling and power.
Firmware compared with Ubiquiti's own release pages, published vulnerabilities for each model, hardware that is out of support, and which internet services the address can get.
Eight areas in every report
A diagram of how everything connects today: gateway, switches, access points, uplinks and any third-party switches in the path.
Which switch is the root, whether spanning tree was ever configured, how long the network takes to recover from a change, flapping ports, uplink speeds and PoE budget.
Channel, width and power on every access point, how busy each channel is, interference between your own access points, retries, roaming and client health.
IGMP snooping and querier settings, and which devices flood the network. Multi-room audio, TV and casting problems usually start here.
A matrix of every network and device group, showing what a guest, a staff laptop or a smart TV can reach. Cameras, alarms and printers get their own rows.
Every device that answers on the network, the services it has open and whether it asks for a login: cameras, printers, air conditioning and AV controllers.
Intrusion prevention, region blocking, encrypted DNS, firewall rules, port forwards, UPnP, admin accounts, backups, update settings and known vulnerabilities.
Double routing through a carrier modem, failover, line history, battery backup, and whether the address can get a faster or more reliable service.
The report
A written report with a findings register. Each finding is rated critical, high or medium, and tagged as measured or as our reading of the evidence, so you can see which claims come straight from a scan or a capture.
It includes diagrams of the network as found and as proposed, a Wi-Fi channel plan, and a map of which fix closes which finding. If work is needed, the report comes with staged options and prices.
You can have us do the work, or hand the report to your own IT.
Book a UniFi auditBuilding scale
On some sites an outage stops work for everyone in the building. For those we give each layer a second path, and the design repeats floor by floor, so it grows without being rebuilt. A smaller office can take any one of these on its own, such as a backup internet link.
Two gateways run as a pair, and the second takes over if the first fails or restarts for an update. We test the failover on site before handover.
Two fibre services share the load and either can carry the site alone. Floor switches link to the core over fibre, a spare core switch sits racked and cabled, and every rack has battery backup.
Wi-Fi 7 access points are placed from the floor plans to cover suites, corridors, meeting rooms and outdoor areas. One network name runs through the building, and devices roam between access points as people move.
A new floor, tenant or site repeats the same pattern of switch, access points and network segments. Nothing already running has to be redesigned.
What's included
A new network runs in four parts, whether it is one floor or a whole building. You can take all of them, or only the ones you need if you already have a cabler.
We work from your floor plans to decide where the access points, switches and racks go, and how the network is divided up.
The physical work is done by our installation partner. They run the data cabling, build the racks and mount the access points, switches and cameras.
We configure the network and test it on site before anyone relies on it.
You get written documentation for the network, and guides for the people who use it.
Who it suits
One floor, one team. Wi-Fi that reaches every desk and meeting room, staff signed in with their work accounts, a guest network that cannot see the office, and printers and phones on their own network.
Many tenants share one building network, and each of them needs to be private from the others. Every suite or team gets its own Wi-Fi password and its own network segment. Building staff can issue keys and guest access themselves.
One organisation with staff, guests, meeting rooms, printers and phones on the same hardware. Staff sign in to Wi-Fi and VPN with their Microsoft 365 account through UniFi Identity, each group gets its own network, and a second internet link covers failover.
Each site is built to the same standard and monitored from one console. We already look after multi-site UniFi networks for medical practices in Sydney and regional NSW.
Recent project
The operator wanted every tenant to have a private network without running a separate network for each suite. We designed one UniFi network for the whole building. Dozens of private suites across several floors share a single Wi-Fi name, and each suite has its own password. That password puts the tenant's devices on a network only they can reach.
The building runs on two fibre services and a pair of gateways in high availability, so either can fail without taking the offices offline. We have seen the second gateway take over on the live network. Each floor has its own switch and battery backup, and a spare core switch sits racked and cabled. Meeting rooms, printers, audio and cameras use the same hardware on their own network segments.
Our installation partner built the racks from our drawings. We configured and commissioned the network, audited every setting after the install, and wrote the guides the building's staff use to issue Wi-Fi keys. The first stage is live, and later stages repeat the same design. On its busiest day so far the Wi-Fi experience score stayed above 98% every hour. Alerts from the network come to our helpdesk.
Talk to us about a similar projectNetwork security
Out of the box, a UniFi network is one flat network with one shared Wi-Fi password, and every device can reach every other device. We replace the shared password with sign-in, split the network into zones, switch the gateway's protections on and keep watching it. These are the same things our audit looks for on other people's networks.
We link UniFi Identity to your Microsoft 365 directory. Staff sign in once with their work account in the UniFi Endpoint app, and Wi-Fi and VPN access follow the person from then on.
Devices that cannot sign in, such as printers, TVs and audio gear, go on their own locked-down network. In shared buildings where the tenants are separate companies, each tenant gets a private key and a private network instead.
Then the rest of the network
Staff, guests, devices, cameras and phones each get their own network, grouped into firewall zones. The default between zones is block, and every exception is a named rule. Guests reach the internet and nothing else.
Intrusion prevention is on and set to block, with CyberSecure threat signatures updated weekly on managed networks. Region blocking, encrypted DNS and web filtering are set network by network.
Staff reach the office through a one-click VPN tied to their sign-in. Port forwards and UPnP are removed unless there is a documented reason for them.
Console accounts belong to named people and use multi-factor authentication, with no shared logins. The gateway's admin pages are blocked from guest, tenant and device networks.
Unused switch ports are disabled and ports for fixed devices are locked to that device. Spanning tree is configured on purpose, with guards against loops and rogue DHCP servers.
WPA3 wherever the devices support it. Guest Wi-Fi is isolated behind a portal or vouchers. Rogue and risky Wi-Fi is flagged by the AyeTech Hub and reviewed.
Firmware is tested on one device before it goes to the rest, and checked against flaws that are being actively exploited. We patched a critical UniFi flaw across 400+ sites within 24 hours. Hardware that has stopped getting security updates is scheduled for replacement.
Every UniFi device is checked every 2 minutes. Intrusion alerts from inside the network are investigated, and 90 days of history is kept so a pattern can be traced back.
The network is one layer of security. For endpoint protection, email security and Essential Eight work, see our cyber security services.
Managed network plan
Once a network is live, someone has to watch it, patch it and make changes as people come and go. Our managed network plan does that remotely from the AyeTech Hub, our own monitoring platform, starting at $500 a month ex GST with Ubiquiti's CyberSecure subscription included. The price depends on the number of devices and sites, and we confirm it in writing before you start.
The Hub checks every UniFi device and each internet line, day and night. An outage is seen within 2 minutes and a ticket opens at 10. It checks whether the cause is a power cut or an internet fault, and pages an engineer when an alert needs a person.
Ubiquiti's paid CyberSecure subscription adds Proofpoint threat signatures, updated weekly, and Cloudflare web filtering set network by network. Intrusion prevention is on and set to block. Alerts from inside your network are investigated, and an engineer blocks the device or clears the false alarm.
UniFi on its own keeps 5-minute detail for 24 hours. We keep 90 days of line quality and gateway events, so a fault that keeps coming back stands out. A slow or patchy line, or 3 dropouts in an hour, opens a ticket with numbers you can take to your internet provider.
For UniFi networks we installed, and for existing networks after an audit.
Not included: new equipment, on-site visits (charged at standard rates) and internet charges.
Ask about the managed planNew builds, fit-outs and upgrades are quoted separately once we have seen your floor plans or walked the site.
One-off work on a UniFi network you already have. We quote after a short call about what is going wrong or what you want checked.
Questions
Get started
Tell us whether it is a new network, a fault or an audit. The floor area, the number of people and what is installed now all help. We will come back with questions or a time to look at it.
Day to day on a managed network
Tell us about the site, or the details of your current UniFi setup, and we will tell you what we would do. You can email floor plans to help@ayetech.au.
Managed networks start at $500 a month ex GST, and we can supply the internet connection too. If the Wi-Fi is the problem, the office Wi-Fi troubleshooter takes two minutes.